Foam Ceiling Ladder | FCL
If we do not require low-frequency management on our ceilings, we can use the foam ladder for our ceilings. The foam ladder is our world famous Studio Pro Foam with a wood frame around it for support. The foam is not rigid enough to stand on its own ,so we take our full sheet of foam and put a wood frame around each piece. absorbs from 125 Hz. – 6,300 Hz. You can hang it in a horizontal position with eye hooks. We have even placed lighted LED’s around the edge that you can control with a IF remote.
The foam is a grey color. One side of the foam has a texture to it. The flip side is smooth. You can choose which side you wish to display. The foam comes only in grey. You can paint the wood frame any color you wish to match existing decorum. If you desire a fabric covering, we can add fabric at an additional cost of 200.00 USD / unit. You can choose from over 50 different colors and textures for fabric options.
The foam sheets measure 55″ x 75″ x 2″. If we have floor to ceiling issues lower than 125 Hz. we can double the foam thickness to achieve a resonant frequency of 90 Hz. The frequency and amplitude issue will depend on the room dimensions and the associated usage. We can go down to 80 Hz. if we increase the foam depth to 6″. With this methodology, we have the option of going down to 80 Hz. without bringing in the big diaphragmatic units which are heavy and require special mounting systems. Each foam panel with a wood frame weighs 20 lbs.