💡 Click Here To Solve Your Room Acoustic Problems
Contact Us / Log in or Sign up / Call us today! 520–392–9486, 8am – 6pm
PFP Series Acoustic Foam-4

Acoustic Foam

Home » Products » Sound Absorption » Foam Frame Panel

Foam Frame Panel

$50.00 – $350.00

The most economical way to install our foam technology on your walls or ceiling is to use our foam and the mounts. This allows for airflow on both sides as the mount pushes the foam 2″ away from the surface to allow for air floor. Foam and mounts are designed to work together.

If foam pieces on your walls or ceiling are not acceptable, you can use our foam panel. It is our foam technology with a 3/4″ wood frame around its edge. It hangs flat against the wall and is installed using a single screw just like a picture frame. Wood frame can be painted any color. Foam is grey only.

Foam panels come in four sizes: There are 19″ x 2″ x 27″, 26″ x 2″ x 56″, 38″ x 2″ x 56″, 56″ x 2″ x 75″

Clear
These units have special handling and shipping requirements, due to their weight and size. Please call us on 520-392-9486 or click HERE to contact us so we can assist you further.
Add to Studio Wishlist
SKU: 565642308 Category:
Size

19" x 2" x 27", 26" x 2" x 56", 38" x 2" x 56", 56" x 2" x 75"
There’s no one size fits all when it comes to room acoustics. Your room is unique to you. If you see acoustic treatment analysis calculators on other sites, that’s all about marketing but no function. You need a live engineer to look at your room because there are too many variables in play to have a one size fits all solution. And any company that provides a one size fits all solution are just selling a bunch of band-aids that aren’t going to solve your problem. We're offering a REAL and FREE acoustic treatment room analysis, conducted by none other than Dennis Foley, our chief acoustics engineer himself.

Please click the button below to get your FREE acoustic treatment analysis.



If you have any questions please check our FAQ or send us an email directly to info@acousticfields.com.

Related products

  •
    Pro Line Carbon Amp Platform | CAP $750.00

    Amplifier/speaker cabinets produce energy, lots of energy. That energy leaves the amplifier and enters the room. Once in the room, it interacts with the room and excites all the relevant room modes. We must attenuate or absorb as much excess energy as we can as close to the source or cabinet as we can. This will insure a tight and defined presentation as the signal enters the room.

    Amplifier cabinets vibrate. The sound that emanates from the cabinet is the product of the speakers, electronics, and cabinet. If we reduce the cabinet vibrations, we allow the speaker and electronics to come through better. Our carbon amplifier platforms reduce vibration and absorb energy. It will provide you the one two punch you need to get the best sound out of your cabinet, speaker, electronics, and room.

    These are custom sized to your cabinet. You tell us the height requirement along with the cabinet width and depth. They can be painted or skinned with a wood veneer. We will custom build it to suit your individual requirements.

    Add to cart
  • Pro Line Carbon Speaker Stand $550.00 – $750.00

    Speaker stands do many things for us. First, they separate the vibration of the speaker cabinet from our desk. Second, they allow the speaker to be the correct height. Third, they can provide broadband low frequency absorption in the area of the room that has the highest unwanted low frequency pressure. The front wall where our speakers are located is always an area of high frequency pressure.

    Achieving good sound in your room is about doing a lot of little things in the correct order. Reducing the vibrations of the speaker cabinet by setting it on a platform that is designed to absorb excess vibration and air born energy allows for the driver and the crossover to work together to produce energy without those cabinet resonances interfering. We use a damping compound layer that your speaker will sit upon.

    Using our carbon technology we achieve a platform that reduces cabinet resonances and also provides needed broadband absorption in the front of our rooms. This is the same technology used in our ACDA-10 and ACDA-12 units. Stands can weigh up to 50 lbs for the 12″ x 12″ version. The 12″ model will absorb from 30 – 50 Hz. and the 10″ deep unit will have broadband absorption from 30 – 200 Hz. The 8″ platform will start at 40 cycles and go through 200 Hz.

    Three widths are available. We have a 8″ x 8″ , 10″ x 10″, and a 12″ x 12″ model to accommodate different speaker widths and depths. Heights usually run around 30:” but you will have to tell us what height you desire. Finish is black paint enamel with 5 coats of paint hand sanded and clear coat sealed. Need a special width or height, just let us know.

    PRICING: 8 x 8 $375.00 10 x 10 $475.00 12 x 12 $575.00

    Select options
  • ACDA Series ACDA-12 MINI Studio $650.00

    The ACDA-10 MINI Studio and the ACDA-12 MINI Studio are designed for studios who want to manage the unwanted pressure areas around your drums. With the broadband absorption represented in the ACDA-10 (ACDA 10 Riverbank Acoustical Labs Testing Results) and the more frequency specific absorption provided by the ACDA-12 (ACDA 12 Riverbank Acoustical Labs Testing Results)., you have two acoustical tools at your disposal to minimize the pressure levels at the microphone positions in order to achieve that large, tight, and defined drum sound everyone desires.

    Units are 20″ w x 36″ h x 16″ d and weigh 105 lbs. Units are shipped upon pallets and delivered to your studio location.

    Add to cart
  • Image of a ACDA-10 Ceiling System Module
    Image of a ACDA-10 Ceiling System Module
    ACDA Series ACDA-10 CSM | Ceiling System Module $650.00

    The ACDA-10 CSM (module) is a smaller version or our production ACDA-10 unit. It is a broadband absorber from 30 Hz. – 200 for lower frequencies and with our 2″ foam face, absorption is increased through 6,300 Hz.

    – ACDA 10 Riverbank Acoustical Labs Testing Results

    With broadband low frequency absorption, you have a powerful tool that you can distribute across your ceiling system to deal with unwanted floor to ceiling pressure issues.  Numerous wood and fabric texture and colors are available.

    Read more about our PLE (Personal Listening Environment)

    Add to cart

Reviews

There are no reviews yet!

Be the first to write a review

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.

FREE ROOM ANALYSIS
Call Us 520–392–9486
100% Money Back Guarantee

© 2018 Acoustic Fields