Acoustic Ceiling Tile

November 16, 2019 No Comments

The rooms that we must work in, play in and listen to music in all have many things in common. They have four walls, a floor, and a ceiling. We use all of these six surfaces when we are dealing with noise or sound energy within a room. The floor to ceiling dimension in our […]

Personal Listening Environment (PLE)

April 13, 2017 No Comments

I just wanted to take a moment while I was in Sacred Ground and talk about our personal listening environment. A lot of you call me every day, you send me emails, you fill out the room form and the first question most of you have is how much of what type of material and […]

Classroom Design Service

September 15, 2016 No Comments

Today we’re going to talk about our classroom design service. We get a lot of work with classrooms, we do a lot of work with churches. And what is the goal in a classroom? Obviously, you have to hear the spoken word. Because the teacher’s up in front of the class, the students are in […]

23rd International Congress on Sound & Vibration, Acoustic Fields ACDA-12 CSM

September 11, 2016 No Comments

The 23rd International Congress on Sound & Vibration (ICSV23) was held in Athens, Greece, from 10 to 14 July 2016 in cooperation with the Hellenic Institute of Acoustics (HELINA) and the Hellenic Institute of Transportation Engineers (HITE). Maria Kousi’s abstract The Athens Research Centre For Music Acoustics And Architecture; Integrated Acoustical Design Of The Multipurpose Auditorium is […]

Sacred Ground Pocket Door

October 7, 2015 No Comments

The following is an unedited transcript from our video series from Acoustic Fields. There will be some errors in grammar and sentence structure that occur during this translation process. For complete understanding and comprehension, please view the video which is included in this text. For any additional information regarding this topic or others relating to […]

Sacred Ground Ceiling System

September 30, 2015 No Comments

We’re going to take a little bit of a look at the ceiling system today in Sacred Ground. It’s a combination of diffusion and our low frequency carbon absorption. Let me see if I can get the camera to do what I want for us here. If we go over here, I think we can […]

Sacred Ground Absorber Wall

September 23, 2015 2 Comments

We’re inside our new studio in Los Angeles and we just went through the pocket door which is on the left. And then you can see the room construction for the one wall on the right. This is our Absorber Wall technology. This has carbon between the stud spaces and then we take each stud […]

Would you recommend buying any bass traps at all?

October 28, 2014 No Comments

In a recent Google Hangout I was posed a question by a Youtube subscriber called Glowing Lights Official in which he basically asked “Would you recommend buying any bass traps at all? Would it be better to focus on absorbing higher frequencies and attempt to make some DIY bass energy absorption units to maybe at […]

What Kind Of Home Theater Acoustic Ceiling Tiles Do I Recommend?

September 11, 2014 No Comments

One of the questions from last weeks Google Hangout stated “I’m researching which home theater acoustic ceiling tiles I need and want some guidance. I want a mixture of absorption and diffusion on the ceiling. So what kind of ceiling tiles are going to be appropriate? Foam panels?” Alright so let’s back up a little […]

Sound Absorbing Ceiling Panels

Sound absorbing ceiling panels are a popular way to treat ceiling sound absorption needs in our rooms. In our rooms, we must be able to hear music and vocals. You need to have so much absorption and so much diffusion to bring the room into some acoustical balance for music and speech.

Placing sound absorbing ceiling panels on the room ceiling, can supply some of the total absorption coefficient needed within the room. Room usage has a lot to do with how much absorption to use in the ceiling and of what rate and level. How does one know how to choose the correct one that has the right rate and level of absorption for this particular room?

Sound Absorbing Ceiling Panels

We have all seen the standard, 2′ x 2′, press board type with white color, sound absorbing, ceiling panels. They are the 1/2″ thick ones that hang in the grids of our suspended ceilings. What are these things and how well do they work. They are very cheap per square foot and they have minimal absorption coefficients but there is a synergy that occurs where each piece of the sound absorbing panels is dropped in place and then covers the total ceiling area. So, even though each piece does not perform very well, together as a group they are a cost effective application in most commercial buildings.

Room Usage

The usage of the room is a critical factor to know at the beginning of the project. What is the room going to be used for. Will it be for music and vocals. Will the music and vocals have electronic sound reinforcement added to the sources of each vocal and instrument. What will be the average amount of people in the room at one time. What will be the average band or music group size. All of these factors will contribute to what type of sound absorbing ceiling panels you will select from. The thickness of the sound absorbing ceiling panels is the only variable that you can adjust for.

Thickness Determines Performance

To figure out how many and what thickness of a sound absorbing ceiling panels to get, you have to first determine what your actual acoustical absorption issues are and what is its number. You can measure the room and obtain the reverberation times within the room. Once you know the reverberation times and the intended room usage, you can now begin to figure out how many sound absorbing panels and how thick they should be. Think of all of the sound absorbing ceiling panels as miniature “sound sponges”. Each one by itself will not have much impact on the total amount of absorption needed in your room, but together they can most of the time by adding sound absorbing ceiling panels, you can lower the reverberation times within your room down to acceptable levels just using the ceiling as your work area.

Acoustic Panels

Appearance And Performance

Acoustic Fields has sound absorbing ceiling panels that are not your typical ceiling tile. Each one of acoustic fields ceiling tiles has the ability to have 3 different thicknesses applied inside each unit. Based on your own individual room requirements and budget, you can cover less surface area with thicker foam and achieve the same results as covering the entire ceiling area. Fabric selection has over 50 different color and 10 different fabric options to pick from. There will be a color and texture of fabric to compliment any decor. Go here to check out our acoustic ceiling panels here.

Full Time Assistance

Along with the flexibility of choosing your own amount and level of absorption by varying the thickness of your Acoustic Fields sound absorbing ceiling panels, you can also have the product design team and engineers assist you with the correct installation methods and any technical issues. Acoustic Fields can even measure your room for you to make certain you are starting from the correct reverberation times and amount of material needed.

Call us directly at: 520 – 392 – 9486 MST or

Thanks and I look forward to helping solve your room acoustic issues shortly.