QDA-13 M | Modular Diffuser / Absorber
It is important to have both frequency-specific and broadband low-frequency absorption on all wall surfaces. Our QDAM-13 has our carbon technology installed inside the diffuser itself. You achieve the same performance as our ACDA-10M and the power of prime number 13 diffusion all in our 24″ x 24′ x 12″ d module that you can stack and create both one dimension and two dimension diffusion.
Placing the rear wall diffusion modules in the vertical domain, you can create one-dimensional diffusion. One dimensional diffusion will add more “air” and specialty to your presentation. Two-dimensional diffusion occurs when you alternate both vertical and horizontal orientation. Two-dimensional diffusion is used when rear wall distances and smaller and you need to minimize the impact of rear wall diffusion at the mix position.
The QDA-13M are 24″ x 24″ x 12″ and weigh 80 lbs. They can be built in three wood types. We have maple, cherry, and walnut. Cherry is the best wood choice for middle-range tonal balances. Most rooms require a minimum of 8 units across the rear walls.