Register | Lost password?
Advanced Search
Forum Scope


Forum Options

Minimum search word length is 3 characters - maximum search word length is 84 characters

Please confirm you want to mark all posts read

Mark all topics read

sp_MobileMenu Actions
Not logged in

New/Updated Topics

Select Forum

HELP Building bass traps & panels with room calculations
Posts: 1
January 27, 2021 - 9:50 pm


I have a 8'8" x 12'4" x 6'8" room. Enlarger

I have recently made calculations on REW, here are the graphs. Enlarger

I recognize is the dip at 110HZ could be from SBIR and so I do plan on adjusting my monitors. Currently I have them two feet off the wall with no specific measurements. I have learned that since I have a room on the small side I could put my monitors close to the wall with absorbers right behind since I can't flush mount my speakers.

What I am onto next is constructing panels and bass absorbers (since I am on a slight budget). What I would love to know is how thick I should construct these and where would the ideal place to place them be. I am attempting to create my room as a production/mixing room. I also want to figure out how to set up a mic spot for the best vocal production (I was thinking of being able to move panels if need be to give the vocals more roomier sound)

Would appreciate all the help y'all can offer. :D

Posts: 447
January 28, 2021 - 6:06 am

We have build plans for the BDA unit which is what you will need to start treating this room. You will need to build enough to cover all 4 walls. Due to your room size and low ceiling height, you will need our carbon technology. The carbon is 350.00 / unit plus shipping.

Forum Timezone:
Most Users Ever Online: 99
Currently Online:
Guest(s) 2
Currently Browsing this Page:
1 Guest(s)

Devices in use: Phone (2)

Forum Stats:
Groups: 4
Forums: 10
Topics: 439
Posts: 1181
Member Stats:
Guest Posters: 25
Members: 16317
Moderators: 0
Admins: 2