I came across this article on audio.tutsplus.com written by Björgvin Benediktsson about 5 ways to use reverb effectively in mixing. The first way is Gates. This method uses reverb without a long tail and decay. The second method is Compressors. In this method, the reverb swells when the vocals stop. The third method is EQng Reverbs. This filters out the lower frequencies in the reverb, eliminating muddiness. Fourth is The Diffusion Button. This creates a shorter reverb, sounding more live. Finally is Pre-Delay. Pre-Delay is good for vocals as it creates more distance between the reverb and vocals. Reverb is an effective mixing tool. Using different and varied techniques can create even better mixes for your music so do check out the full spectrum and read up on your options in the below post.
We use broadband absorption in the two most critical frequency regions in small rooms. Our Diaphragmatic absorbers, ACDA series, have…
Interesting web site and provocative introduction. Please check your copy for typos, otherwise nicely presented. I would like to see…
There is no such thing as soundproof anything especially carpet. Low frequency noise transmission requires a permanent construction fix with…
Hello Dennis! Our neighbors put a Ice Bath in their garage which is right below our bedroom and the Low…