Acoustic Fields - Forum: Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/ Simple:Press Version 6.6.2 Dennis Foley on MLV double layer with or without gap? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p1216 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p1216 Use the RTA pro app from the app store.

]]>
Wed, 10 Feb 2021 05:43:43 -0800
Fleece on MLV double layer with or without gap? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p1215 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p1215 What is the best way to accurately measure the frequency and amplitude of the noise? What kind of equipment do I need for that and where can I find it? Thank you very much for all the info you provide.

]]>
Tue, 09 Feb 2021 20:32:35 -0800
Dennis Foley on Noisy neighbor! https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/noisy-neighbor/#p1160 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/noisy-neighbor/#p1160 You must first and foremost measure the frequency and amplitude of the noise issue. We can assist you with this project. The noise design fee is 2,000 USD.

]]>
Sun, 15 Nov 2020 13:43:09 -0800
jonoyakker on Noisy neighbor! https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/noisy-neighbor/#p1158 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/noisy-neighbor/#p1158 Hello and thanks in advance for your help. I have a close, noisy neighbor (speech and banging doors) They are rather inconsiderate and my requests to reduce the noise have not been sufficient.

Would a wall on the property line that is constructed of metal roofing help much?

]]>
Tue, 10 Nov 2020 20:20:49 -0800
tmessina on Lead sheet, lead plywood, lead sheetrock https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/lead-sheet-lead-plywood-lead-sheetrock/#p1155 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/lead-sheet-lead-plywood-lead-sheetrock/#p1155 I would like to start a discussion of using sheets of lead, lead plywood, and/or lead sheetrock as acoustic treatment tools. If anyone has any thoughts or information could you please add them to this topic.

]]>
Sun, 01 Nov 2020 15:06:11 -0800
Atto on Cheap sound proofing method for human voice. https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/cheap-sound-proofing-method-for-human-voice/#p1148 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/cheap-sound-proofing-method-for-human-voice/#p1148 - self-deleted post -

]]>
Sat, 03 Oct 2020 06:16:06 -0700
Dennis Foley on Layering 5/8" sheetrock over 5/8" OSB ?? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/layering-5-8-sheetrock-over-5-8-osb/#p1101 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/layering-5-8-sheetrock-over-5-8-osb/#p1101 E, Neither method will be sufficient. You must use methodology that is a full range covering frequencies from 30 Hz. - 20,000 Hz.

]]>
Wed, 29 Jul 2020 14:00:37 -0700
engineerjoel on Layering 5/8" sheetrock over 5/8" OSB ?? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/layering-5-8-sheetrock-over-5-8-osb/#p1080 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/layering-5-8-sheetrock-over-5-8-osb/#p1080 Building a wall Separating a Control Room with Live Track Room: Would layering two different types of material such as sheetrock and OSB would help reject/block/isolate (or whatever you want to call it) sound more efficiently than layering two layers of 5/8" sheetrock???

please advise.

thanks.

]]>
Tue, 30 Jun 2020 13:06:44 -0700
jazmario98 on Treatment to dampen sound inside of a closet https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/treatment-to-dampen-sound-inside-of-a-closet/#p1069 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/treatment-to-dampen-sound-inside-of-a-closet/#p1069 Hey, is this forum still active?

]]>
Tue, 02 Jun 2020 01:01:41 -0700
jazmario98 on Treatment to dampen sound inside of a closet https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/treatment-to-dampen-sound-inside-of-a-closet/#p1061 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/treatment-to-dampen-sound-inside-of-a-closet/#p1061 Hi, I found you on YouTube while researching soundproofing. Your videos
are incredibly helpful! I'm an absolute beginner so apology for all the gaps in my knowledge, but I'm just seeking advice on the following project.

My project - Silly as it sounds, I'm just trying to turn my closet (image link at the end of the post) into an area where I can practice my singing (my roommates and I have opposite work schedules so I'm often practicing when they're sleeping. I don't have a car to practice in and renting practice space isn't an option right now). My goal is to dampen the amount of sound my roommates AND the apartment below me can hear as much as possible, knowing full well that "soundproofing" to any degree is completely unrealistic without constructing a separate structure within the closet. So again, reducing the amount of sound they can hear is my only goal. I'm on a budget and trying to spend less than $350 if at all possible...luckily I'm on the top floor so I don't need to worry about sound traveling upwards.

After hours of DIY research, the initial plan I came up with was: 1) create rockwool panels by encasing rockwool in chicken wire and then encasing the panel in a sleeping bag, and hanging one of those on every wall in my closet 2) covering the walls with panels of MLV vinyl using a staple gun, going over the rockwool panels, and then 3) making a lame attempt at a floating floor by laying down another layer of MLV vinyl on the floor, stacking some neoprene rubber blocks and then overlaying that with some drywall to form my "floor." Another guy even recommended a layer of tennis balls cut in half instead of the rubber blocks.

However, after watching your videos
I don't want to go anywhere near rockwool. So I feel back at the starting line. So my question remains - if I want to reduce the sound as much as possible that others can hear when I'm singing in this closet, with the sliding mirror door closed, what treatments or materials would you recommend (staying hopefully under $350)? And furthermore, though I'm afraid to ask, can I even achieve any meaningful sound dampening via DIY methods on this budget, or is this a waste of effort? Some other hacks I was going to try was buying soundproofing window treatments for home theaters and hanging those, but those are around $400 each and I'd need 4 of them.

Thanks in advance for your advice. Really appreciate all the knowledge you're spreading via your channel.

Photo of closet:

View post on imgur.com

]]>
Tue, 19 May 2020 19:51:08 -0700
Taewon Kim on which ppi of Carbon(Graphite) Foam do i need to buy ? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/which-ppi-of-carbongraphite-foam-do-i-need-to-buy/#p1039 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/which-ppi-of-carbongraphite-foam-do-i-need-to-buy/#p1039 I bought and Read "All In One
DIY Acoustic Treatment Build Plans Package" .

But there is no mention about Carbon Foam ppi.

which ppi of Carbon(Graphite) Foam do i need to buy ?

]]>
Sun, 15 Mar 2020 18:29:33 -0700
Dennis Foley on Building my recording booth inside my room https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/building-my-recording-booth-inside-my-room/#p1008 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/building-my-recording-booth-inside-my-room/#p1008 D, No, MLV will not work for dog barks. You must measure the noise and design the proper barrier technology to deal with the frequency and amplitude of the noise. Guessing with noise is a losing proposition.

]]>
Sun, 02 Feb 2020 15:56:46 -0800
dl2000 on Building my recording booth inside my room https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/building-my-recording-booth-inside-my-room/#p1007 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/building-my-recording-booth-inside-my-room/#p1007 I’m building a recording booth inside my room. Right now the structure is ready (made with pine board). I have hanged acoustic blankets in the internal part of the structure. This is part of the process and how it is looking right now.

View post on imgur.com

I would like to wrap it completely (including the top and bottom part) with an outer layer of Mass Loaded Vinyl, with a density of 1 lb / square feet.

I want to reduce the barking sounds coming into my room. which are in several frequencies, some low frequency barks from bigger dogs and some higher frequencies coming from smaller dogs.

The dogs are from the neighbors, each one in their own house, but my room has a big window in one of the walls.

Would the mass loaded vinyl have a significant impact in reducing this noise?

Thanks!

]]>
Sun, 02 Feb 2020 07:41:17 -0800
dl2000 on Home Recording Booth https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/home-recording-booth/#p1005 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/home-recording-booth/#p1005 I wasn't able to delete this post but I updated it and is now in: https://acousticfields.com/aco.....e-my-room/

Sorry.

]]>
Sat, 01 Feb 2020 07:27:43 -0800
Dennis Foley on MLV double layer with or without gap? https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p994 Sound Barrier Technology https://www.acousticfields.com/acoustics-forum/sound-barrier-technology-1/mlv-double-layer-with-or-without-gap/#p994 L, I do not know what "loud neighbors" means. You must measure the frequency and amplitude of the noise and then build the appropriate barrier.

]]>
Mon, 20 Jan 2020 07:29:55 -0800