New Control Room Build: Ceiling Design Help-Acoustics Forum-Acoustic Fields Forum

Please consider registering
Guest

Home Acoustics Forum Recording Studio Design New Control Room Build: Ceiling Des…

New Control Room Build: Ceiling Design Help

toddpipes

Member

Members

Forum Posts: 4

Member Since:
October 18, 2017

Offline

July 31, 2018 - 5:21 am

Hi All. We are building a new control room, and I’ve got the walls sorted—angles, traps, diffusion, etc, but I don’t know where to go with the ceiling. Our height is 11’6″, and I was thinking of a sloping drop ceiling (using Tectum tiles) that would start at 9′ in the front and raise to 11′ in the back.

Again–this is just what I’m thinking. There’s a lot of info online about wall shapes and solutions, but not much of anything regarding ceilings. Any ideas?

Dennis Foley

Chief Acoustics Engineer

Forum Posts: 629

Member Since:
August 12, 2013

Offline

July 31, 2018 - 7:06 am

T, You have two options: diffusion and absorption . Without knowing anything about your room, it is difficult to determine. Fill out the information in this link: https://acousticfields.com/fre…..-analysis/

toddpipes

Member

Members

Forum Posts: 4

Member Since:
October 18, 2017

Offline

August 1, 2018 - 9:33 am

Dennis Foley said
T, You have two options: diffusion and absorption . Without knowing anything about your room, it is difficult to determine. Fill out the information in this link: https://acousticfields.com/fre…..lysis/

Submitted–Thanks!